Can you connect two macs with ethernet cable

However, you can use a USB to ethernet adapter on both Macs. You would only use this method if it was the only choice available. We do not recommend using Target Disk Mode with ChronoSync because this method can lead to file permission changes that leave unexpected and potentially unusable results after syncing files. If you absolutely must use TDM, please contact our support team to discuss all the possible issues first.

Now that you have established a direct connection between your two Macs, the next step is to configure the Macs to share files. This, in turn, will allow you to configure a ChronoSync document to synchronize or backup files between the two computers. This guide will primarily focus on using the built in file sharing capabilities of macOS.

However, there is another option — ChronoAgent. Installing ChronoAgent on your second Mac the one not running ChronoSync will provide a much more robust and higher performance connection between the two computers. File Sharing is a service built into macOS that allows you to connect to other computers.

The following steps explain how to enable file sharing on one computer and then access that computer from another Mac. You begin by enabling file sharing on the Mac that is not running ChronoSync. Enter your administrator credentials to allow you to make changes. After doing so, this computer may now be reached by the Mac on the other end of the direct connection.

Most of the time, this has already been set for you. Sometimes, however, it is blank — and that can cause problems! You should also make a note of the IP address presented near the center of the window. Now you will want to switch over to your other computer — the one that is running ChronoSync. Open a new Finder window and look in the sidebar on the left. In that group you should see the name of the computer you are trying to connect to. You will be asked to authenticate as a user. You may use the administrator credentials from the other computer the one not running ChronoSync.

Home Network. Hub or Router Connection Plug in the network hub or router that you will be using. Boot up the Macs so that they can recognize the network link between them. Improve this question.

MicroMachine MicroMachine 3, 10 10 gold badges 34 34 silver badges 63 63 bronze badges. Add a comment. Active Oldest Votes. Yes, you can use an ethernet cable to quickly transfer files from one computer to the other. It's really quite simple. Plug in the cable Go to System Preferences, and make sure that Ethernet is enabled.

Type in an IP address that's not commonly used, so you don't have conflicts: i. Improve this answer. For me, this solution doesn't allow me to use a wireless internet connection on either computer. How does one allow for sharing over an ethernet cable while still using the wireless for internet?

Is it possible? Make sure your wireless connection is at the top of the list, or at least, above the ethernet connection. This will make sure internet traffic is routed out the correct gateway in this case your WiFi. It should look like this: 4 - On top of your Finder window, look for "Not Connected" and "Connect as" , which should look like this: 5 - You will be prompted to type the ID and a password of the other computer.

When I was trying to move large files from target computer, copying lasted for several minutes, then stopped with an error Posted: April 3. Fix Your Stuff Community Store. Back Answers Index. Mac mini Model A 2, 2. Savlen Dempsley ac2sde Rep: 61 3 1. View the answer I have this problem too Subscribed to new answers. Is this a good question? Yes No. Voted Undo. Score 0.